The end result.
Pre-Knowledge.
Setup your Arduino.
http://brisbaneroboticsclub.id.au/setup-your-arduino/
Install the Arduino Learning Board Library.
http://brisbaneroboticsclub.id.au/arduino-import-learning-board-library/
References.
Nil.
Wiring Diagram.
Please check your sensor. Depending on your model, the sensor connections are different.
| Sensor | Arduino |
| – (minus sign) | GND |
| (No marking) | 5V |
| S (signal) | D2 |
Arduino Code.
File>Examples>Arduino Learning Board>ALB_TempHumidity
Run the Code.
Upload the code to the Arduino.
Upload the code to the Arduino Board and Open the Serial Monitor (Tools>Serial Monitor).
